Author Topic: TLS/SSL enabled telnet?  (Read 11327 times)

Offline JoeShmo

  • Jr. Member
  • **
  • Posts: 45
  • Karma: +0/-0
    • View Profile
TLS/SSL enabled telnet?
« on: November 09, 2012, 11:07:13 AM »
I can't get at the webserver for our vMCD (but can get at the MSL).  So I wanted to get into the 'ol port 2002 to try to restart the webserver for the MCD.  however, both telnet and tls_telnet tell me:
For security reasons, a TLS/SSL enabled telnet client MUST be used to connect
I've tried putty for windows (both ssh and telnet, and changing port to 2002), and tried telnet-tls for linux, and no luck.  Is there any trick, or known working program/method to get it to work?

I suppose I could just reboot the controller, and hope that none of the ~500 users notice.


Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: TLS/SSL enabled telnet?
« Reply #1 on: November 09, 2012, 11:10:33 AM »
If using putty, try change the mode to RAW and then the port to 2002.

Offline JoeShmo

  • Jr. Member
  • **
  • Posts: 45
  • Karma: +0/-0
    • View Profile
Re: TLS/SSL enabled telnet?
« Reply #2 on: November 09, 2012, 12:37:17 PM »
that did it... thanks.. silly me, I THOUGHT about using that RAW option, but didnt.. shoulda tried everything.  oh well.

restarting the webserver didnt seem to help tho.  So I guess I'll just reboot the silly thing after hours.


 

Sitemap 1 2 3 4 5 6 7 8 9 10