So tonight I had to re-IP a voice VLAN, changing the subnet from 172.16.0.0/23 to 10.110.132.0/22... That all went fine, 3300 (MCD4.2), Mobile Extension, UCA, 6510 VM, SpectraLinks, Extreme Network switches, etc., got everything working but the console is giving me headaches. The keypad comes online, so I ran the Configuration Wizard to set the new ICP address, and it communicated properly with the ICP but still is trying to connect to the old IP address as well as the new one, when it did the "Cluster check for additional ICP's" it still shows the original IP address (this is not a clustered system, and there are no entries for elements except the local one) as well as the new one and keeps defaulting to the old address as the Primary ICP and when I run the console it won't come up. So I went into the system configuration file that says plainly "DO NOT EDIT" and found the old IP address and replaced it with the new one and ran the console, now the console works... sort of... you can answer and make calls and use all functions of the console EXCEPT the BLF field shows all extensions idle all the time. What am I doing wrong?