Author Topic: Incoming digits on 5540 IP console  (Read 3832 times)

Offline dutch_tuga

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +2/-0
    • View Profile
Incoming digits on 5540 IP console
« on: October 25, 2012, 11:00:48 AM »
Hi there,

Is there any way to change the amount of incoming digits on an 5540 IP console. From external callers I can only see a maximum of 7 digits followed by the trunk name. Even if I don't give any name to the trunk it will still show a maximum of 7 digits.

Is this the max possible?

Thanks in advance.


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4097
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Incoming digits on 5540 IP console
« Reply #1 on: October 25, 2012, 06:14:20 PM »
It sounds like your COS is missing some options to display caller ID/ANI and it is only displaying DNIS digits. Although if this is a T-1 (non-ISDN) showing the DNIS digits might be the best you can get...

Check these settings in the console and trunk's COS:

Calling Name Display - Internal - ONS   Yes   
Calling Number Display - Internal - ONS   Yes   
Display ANI/DNIS/ISDN Calling/Called Number   Yes   
Display ANI/ISDN Calling Number Only   Yes   
Display Caller ID on multicall/keylines   Yes   
Display Caller ID On Multicall/Keylines Timer   5   

And also in the PRI trunk's COS:

ANI/DNIS/ISDN Number Delivery Trunk   Yes   
   



« Last Edit: October 25, 2012, 06:22:57 PM by acejavelin »

Offline dutch_tuga

  • Jr. Member
  • **
  • Posts: 85
  • Karma: +2/-0
    • View Profile
Re: Incoming digits on 5540 IP console
« Reply #2 on: October 26, 2012, 03:13:14 AM »
Thanks for the lead.

By setting Display ANI/ISDN Calling Number Only to No did the trick. It regards an E1 by the way.

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4097
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: Incoming digits on 5540 IP console
« Reply #3 on: October 26, 2012, 08:59:47 AM »
Thanks for the lead.

By setting Display ANI/ISDN Calling Number Only to No did the trick. It regards an E1 by the way.
Hmmm... odd, eitherway, glad you got it working!


 

Sitemap 1 2 3 4 5 6 7 8 9 10