I've got a major alarm on my 3300 MXeIII for 3 seconds. In the logs it said this:
3008 2012/Sep/06 01:09:57 ResourceMonitor Progress Monitor->RaiseAlarm
Raised Major Alarm on SATA I2C cable
3009 2012/Sep/06 01:10:00 ResourceMonitor Progress Monitor->ClearAlarm
Clear Alarm on SATA I2C cable, curr=0 max=1 minor=100 major=100 critical=101
SATA I2C cable let me think there has been a problem with one of the two hard disk, but everything seems fine with this report.
SATA RAID Controller
Hard Disk Disk
Disk Installed Fault State Status
---- ----------- ----- ------- ------
1 Yes No Normal Match.
2 Yes No Normal Match.
Disk 1 id matches
Current Model Number : WDC WD1600BEVT-00A23T0
Expected Model Number : WDC WD1600BEVT-00A23T0
Current Serial Number : WD-WXG1A90P5127
Expected Serial Number: WD-WXG1A90P5127
Disk 2 id matches
Current Model Number : WDC WD1600BEVT-00A23T0
Expected Model Number : WDC WD1600BEVT-00A23T0
Current Serial Number : WD-WXL1A9022017
Expected Serial Number: WD-WXL1A9022017
RAID Type : Silicon Image 5923
Raid Mode : RAID1 SAFE
Currently Rebuilding : NO
HOST HD 1 HD 2
---- ------ ------
Link Speed 1.5G SATA I 3G SATA II 3G SATA II
Link Detect status OKAY OKAY OKAY
HD 1 HD 2
------ ------
NVM Device State Good Good
Device State Good Good
Device Status SN Matches SN Matches
Match Status SN Matches SN Matches
Raid Size : 160041885696 bytes
HD 1 Drive Capacity : 160041885696 bytes
HD 2 Drive Capacity : 160041885696 bytes
HD 1 Expected Model Number : WDC WD1600BEVT-00A23T0
Current Model Number : WDC WD1600BEVT-00A23T0
HD 2 Expected Model Number : WDC WD1600BEVT-00A23T0
Current Model Number : WDC WD1600BEVT-00A23T0
HD 1 Expected Serial Number : WD-WXG1A90P5127
Current Serial Number : WD-WXG1A90P5127
HD 2 Expected Serial Number : WD-WXL1A9022017
Current Serial Number : WD-WXL1A9022017
Is this something that someone here has already see?