Sip trunk to analog lines

[etailleur]

Hi,

I'm new with the mitel products and i'm trying to configure a way to access the 3300 with sip trunk to access local analog lines.

When i use the inward sip trunk of the mitel, i can get an access to the ip phone but i'm unable to get acces to analog lines and i receive a 403 error in the event log.

Could you explain what are the needed forms for that need ?

Thanks

[ralph]

How are you trying to access the outside lines?   Are you being transferred by someone or auto attendant or did you route a DID number to an outside line via a speed dial?

Ralph

[etailleur]

I'm using a third party radio system called teldio that makes radio like a phone extension. When i dial internal number from that system to the MCD i can join internal phone without problem but when i tried to use an analog trunk line plugged on the mcd from the radio system thru a sip trunk it doesn't work ?

Any help ?

[ralph]

A 403 error means that the call was rejected because it's not allowed.
You need to check the COR requirements to be sure the incoming trunk is allowed to to make that call and then check your COR for both the SIP trunks and the analog line to be sure it has Public Trunk To Public Trunk Access Allowed.

Ralph