Mitel Forums - The Unofficial Source
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Welcome to Mitel Forums. The Mitel resource - by techies, for techies...
Home
Help
Search
Calendar
Login
Register
Mitel Forums - The Unofficial Source
»
Mitel Forums
»
Mitel MiVoice Business/MCD/3300
»
Caller ID with huntgruops
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Caller ID with huntgruops (Read 5189 times)
swilson
Jr. Member
Posts: 68
Karma: +1/-0
Caller ID with huntgruops
«
on:
March 12, 2009, 10:34:25 AM »
This can be confusing so I hope I explain this well. We are having trouble getting caller ID to work for our sales group. Any call to their prime extension(they have 2) is sent to a hunt group via always alternative routing. The members of that hunt group reside on that same sales person's phones as key system keys. With this setup we can't figure out how to get caller ID to display before they answer. What we get now on the display is from ext(sales person ext) until they answer. After pickup there is a 3 sec delay before the call ID is displayed. We have the caller id working right for a normal phone is it just sales people that we can't get right. Is it even possible to get this working pre-answer?
Logged
Mattmayn
Global Moderator
Hero Member
Posts: 1069
Country:
Karma: +14/-0
Re: Caller ID with huntgruops
«
Reply #1 on:
March 12, 2009, 10:46:15 AM »
Try enabling the COS option "Display held call ID on transfer" this might do it.
Logged
swilson
Jr. Member
Posts: 68
Karma: +1/-0
Re: Caller ID with huntgruops
«
Reply #2 on:
March 12, 2009, 10:49:54 AM »
Tried it on the phone and then assigned a class of service to the hunt group and tried it there too same results. Forgot to mention if you call the hunt group directly it works.
Logged
Mattmayn
Global Moderator
Hero Member
Posts: 1069
Country:
Karma: +14/-0
Re: Caller ID with huntgruops
«
Reply #3 on:
March 12, 2009, 02:05:38 PM »
What type of sets do you have? What rel. is the controller?
Logged
swilson
Jr. Member
Posts: 68
Karma: +1/-0
Re: Caller ID with huntgruops
«
Reply #4 on:
March 12, 2009, 02:12:12 PM »
5224'S and 5220's and we are on rel 8.0.11.9.
Logged
Mattmayn
Global Moderator
Hero Member
Posts: 1069
Country:
Karma: +14/-0
Re: Caller ID with huntgruops
«
Reply #5 on:
March 12, 2009, 02:44:16 PM »
why don't you use system speed calls to the hunt group and change their prime numbers since they are being rerouted at all times? This should allow the CLID to be pasted along properly. I tested in my lab and it works fine on 5340's (two line display) but I have not been able to get the 5224 I have to work properly.
It makes sense to change the config since you are just rerouting their number back to them as a different number.
Logged
swilson
Jr. Member
Posts: 68
Karma: +1/-0
Re: Caller ID with huntgruops
«
Reply #6 on:
March 12, 2009, 03:59:13 PM »
I wish we could, the problem is we do different things in Day mode and Night1 and Night2 with their routing. The system has been highly customized to perform exactly how they want it and we can't' change anything without changing how they do business.
Logged
Mattmayn
Global Moderator
Hero Member
Posts: 1069
Country:
Karma: +14/-0
Re: Caller ID with huntgruops
«
Reply #7 on:
March 12, 2009, 07:03:29 PM »
That's a slight problem.
Logged
ralph
Mitel Forums Admin
Hero Member
Posts: 5767
Country:
Karma: +469/-0
Published Author: http://amzn.to/2dcYSY5
Re: Caller ID with huntgruops
«
Reply #8 on:
March 13, 2009, 09:50:11 AM »
Is the problem that when the call goes to the hunt group it displays "Forwarded From" as opposed to the CLID?
Ralph
«
Last Edit: April 22, 2014, 04:59:12 PM by ralph
»
Logged
swilson
Jr. Member
Posts: 68
Karma: +1/-0
Re: Caller ID with huntgruops
«
Reply #9 on:
March 13, 2009, 10:26:34 AM »
It says FROM "ext dialed" ( FROM 1080).
Logged
ralph
Mitel Forums Admin
Hero Member
Posts: 5767
Country:
Karma: +469/-0
Published Author: http://amzn.to/2dcYSY5
Re: Caller ID with huntgruops
«
Reply #10 on:
March 13, 2009, 11:46:41 AM »
Unfortunatly, I don't think there is a way around that. On a 2 line display, that's what it shows when a call is forwarded.
I've never found a work around.
Anyone else got any ideas?
Ralph
«
Last Edit: April 22, 2014, 04:59:22 PM by ralph
»
Logged
swilson
Jr. Member
Posts: 68
Karma: +1/-0
Re: Caller ID with huntgruops
«
Reply #11 on:
March 13, 2009, 12:18:59 PM »
The only thing I have found so far is if you are using a 5330 or 5340. It still says from ext but the next line down will show the caller ID.
Logged
v2win
Global Moderator
Hero Member
Posts: 628
Country:
Karma: +11/-0
Re: Caller ID with huntgruops
«
Reply #12 on:
March 16, 2009, 10:33:22 AM »
Try changing the hunt group type to nametag
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Mitel Forums - The Unofficial Source
»
Mitel Forums
»
Mitel MiVoice Business/MCD/3300
»
Caller ID with huntgruops
Sitemap
1
2
3
4
5
6
7
8
9
10