Author Topic: Possible to dial in and perform overhead page?  (Read 1924 times)

Offline PFloyd

  • Contributer
  • *
  • Posts: 21
  • Karma: +0/-0
    • View Profile
Possible to dial in and perform overhead page?
« on: June 19, 2012, 02:31:37 PM »
We have a question wondering if it's possible to dial in from the outside to a separate DID and initiate an overhead page (with the desire to enter an account/security code beforehand). This is for burglar alarm notification purposes. Can this be done with the 3300?


Offline Mattmayn

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1069
  • Country: vi
  • Karma: +14/-0
    • View Profile
Re: Possible to dial in and perform overhead page?
« Reply #1 on: June 20, 2012, 03:13:47 PM »
I have never tried this before. What if you used a SIP speaker, horn or whatever and assigned a DID to it? I know our Valcom rep swears that their SIP products act just like phones and you can even traditional horns/speakers connect to them.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Possible to dial in and perform overhead page?
« Reply #2 on: June 20, 2012, 03:39:18 PM »
If you have an existing page, meaning you can simulate what you want to do from an internal extension, then the answer is yes.
I've had a bit of fun with this years and years ago.

Set up an independent account code at least 8 digits long.
Create a DISA DID number that requires an account code.

Dial the DID, wait for dial tone, enter account code + '#' and then your access code for your page system.

Remember, DISA is a security hole.  Use it with caution.

Ralph


 

Sitemap 1 2 3 4 5 6 7 8 9 10