« previous next »
Pages: 1 [2]   Go Down

Author Topic: Voice mail hunt group problem  (Read 12610 times)

Offline eciroglu

  • Jr. Member
  • **
  • Posts: 41
  • Karma: +0/-0
    • View Profile
Re: Voice mail hunt group problem
« Reply #15 on: June 05, 2012, 04:23:12 AM »
In addition, why the iPVM task is stopped when the PBX power off? Do i have to execute 'iPVM_Start' command after each system power reboot?

Thanks.

Volkan,
Logged

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5768
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Voice mail hunt group problem
« Reply #16 on: June 05, 2012, 06:14:25 AM »
That is strange.   You shouldn't have have to enter that command every time it reboots.
If it were me, my next step would be to re-install the software.

Ralph
Logged

Offline eciroglu

  • Jr. Member
  • **
  • Posts: 41
  • Karma: +0/-0
    • View Profile
Re: Voice mail hunt group problem
« Reply #17 on: June 05, 2012, 07:37:35 AM »
Quote from: eciroglu on June 04, 2012, 11:46:07 AM
After entering 'iPVM_Stop' and 'iPVM_Start' commands, it works.

How can i remove the announcement that is playing after welcome message like that: 'I am transfering you to 1 0...' ?
I only want to hear my recorded greeting, not any system greeting.

Thanks.

Volkan,

What can you say about this? How can it be fixed?

Thanks.

Volkan,
Logged

Offline martyn

  • Hero Member
  • *****
  • Posts: 688
  • Country: au
  • Karma: +10/-0
    • View Profile
Re: Voice mail hunt group problem
« Reply #18 on: June 11, 2012, 09:50:40 PM »
You don't mention what software revision you are running, but it sounds like it would be odd for that to be a bug as the VM service should start up with the system.

If you connect to the serial interface during boot up and capture the output and post it here there might be a clue as to why it's not starting.
Logged

Pages: 1 [2]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10