Author Topic: Mitel 3300 MCD - call forwarding feature access code, logs?  (Read 4972 times)

Offline mgodinez

  • Jr. Member
  • **
  • Posts: 51
  • Karma: +0/-0
    • View Profile
Mitel 3300 MCD - call forwarding feature access code, logs?
« on: April 11, 2012, 02:11:51 PM »
Dear greater mitel intellect,

We have a mitel 3300 MCD controller.  ver. 4.2 sp2 pr1.

One of our DNI phones has been losing it's call forwarding programming.  Call forwarding is accomplished on the set by entering in a feature access code + system speed call number, which points to a cell phone.  After call forwarding has been enabled, a softkey is activated - indicating that the programming has been accepted on the device.

Are there logs in the 3300 that'll show my feature access code or softkey activation/deactivation behavior?

Thanks for taking a look see :)

Regards,

Mike G.
Seattle, WA


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel 3300 MCD - call forwarding feature access code, logs?
« Reply #1 on: April 11, 2012, 02:26:15 PM »
No logs.
Are you also using UCA or MS Office Communicator?

Ralph

Offline mgodinez

  • Jr. Member
  • **
  • Posts: 51
  • Karma: +0/-0
    • View Profile
Re: Mitel 3300 MCD - call forwarding feature access code, logs?
« Reply #2 on: April 11, 2012, 04:27:12 PM »
Hello Ralph,

Thanks so much for the reply :)

Regrettably, we are not using mitel UCA or communicator.  But thank you for the suggestions - I'll look into these products.

Hmm...any other idea on how i can gather data regarding the feature access code being activated/deactivated/failing?

Thanks again.

Regards,

Mike G.
Seattle, WA

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel 3300 MCD - call forwarding feature access code, logs?
« Reply #3 on: April 11, 2012, 04:51:25 PM »
Is your system rebooting overnight?   That shouldn't make a difference but worth looking at.

Ralph

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel 3300 MCD - call forwarding feature access code, logs?
« Reply #4 on: April 11, 2012, 04:53:22 PM »
BTW:  I've seen this where the janitor was using a phone overnight.  He would turn off the forwarding.

Check the smdr logs to see if a call was made/accepted from that phone after it loses it forwarding.

Ralph

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: Mitel 3300 MCD - call forwarding feature access code, logs?
« Reply #5 on: April 11, 2012, 05:00:14 PM »
What is your code for canceling call forwarding?

I have had people dial the code to block caller id and it was the came code to do something on the PBX I think turn on the headset or something like that.


 

Sitemap 1 2 3 4 5 6 7 8 9 10