Author Topic: Mitel Communications Director  (Read 6826 times)

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Mitel Communications Director
« on: June 13, 2008, 10:25:51 AM »
Does anyone have any experience with this?



Offline swilson

  • Jr. Member
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Mitel Communications Director
« Reply #1 on: June 30, 2008, 11:40:57 AM »
We were part of the beta trial group and currently have two in production with one with over 900 phones on it, the second one is used for resiliency only.

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: Mitel Communications Director
« Reply #2 on: July 02, 2008, 11:02:27 AM »
Are you running the the GA software?

Do you have any hardware or software problems?

Offline swilson

  • Jr. Member
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Mitel Communications Director
« Reply #3 on: July 14, 2008, 11:35:58 AM »
Currently we are not running a GA version of the software but will be again soon.  As for hardware problems we have not had any.

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: Mitel Communications Director
« Reply #4 on: October 15, 2008, 08:58:29 PM »
Does your retrieve license button work or do you or your vendor have to use the SI tool to update licenses?

Offline Mitel100

  • Sr. Member
  • ****
  • Posts: 262
  • Country: gb
  • Karma: +6/-0
    • View Profile
Re: Mitel Communications Director
« Reply #5 on: October 16, 2008, 02:18:30 AM »
Yes, all licensing for the MCD has to be done via the software installer.

Offline swilson

  • Jr. Member
  • **
  • Posts: 68
  • Karma: +1/-0
    • View Profile
Re: Mitel Communications Director
« Reply #6 on: October 16, 2008, 12:10:21 PM »
I am pretty sure they fixed that, b/c we recently moved some licenses around and I was able to retrieve the licenses just fine.  I know they had been working on it for awhile.

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: Mitel Communications Director
« Reply #7 on: October 16, 2008, 04:25:32 PM »
Just spoke with Mitel the initial licensing setup must be done with the SI tool but updates can be done within the ESM.

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: Mitel Communications Director
« Reply #8 on: October 17, 2008, 01:13:12 PM »
It does work within the ESM

Customer had a restriction in the firewall that would let regular MX controllers go out but for some reason was stopping the MXE Servers.

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Mitel Communications Director
« Reply #9 on: November 04, 2008, 03:31:20 AM »
We have a school district running on one of these. The licensing can be updated through the AMC and then updated is the ESM. The only real issue we've had has become a known issue with the current software release -> dial-out of queue for an ACD group doesn't function when your incoming calls come through a PRI on another controller thats networked together.

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: Mitel Communications Director
« Reply #10 on: November 04, 2008, 12:50:51 PM »
Just ran into that problem myself. Do you have an ETA from Mitel on the fix I haven't heard anything.

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Mitel Communications Director
« Reply #11 on: November 09, 2008, 10:10:25 PM »
No, they couldn't even tell me if it would be in the next release or not. So we moved the rads back to the LX that has the PRI. This allows my ACD to remain on the Communications Director, and have my RADs with dial-out work.

Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: Mitel Communications Director
« Reply #12 on: February 02, 2009, 11:26:50 PM »
Just as an update, Mitel has issued a patch for 9.0 to fix this, and will have the patch built into 9.0 UR2 I believe thats suppose to be out in a few weeks.


 

Sitemap 1 2 3 4 5 6 7 8 9 10