Author Topic: remote IP phones randomly cut out  (Read 14285 times)

Offline Mitelmindset

  • Contributer
  • *
  • Posts: 14
  • Karma: +0/-0
    • View Profile
remote IP phones randomly cut out
« on: January 10, 2011, 02:51:20 PM »
One of my remote sites 5212 IP handserts randomly cuts out while users are on the phone. The site is connects via HP Procurve POE to VLAN over to host PBX in another city.  Oddly this just began happening with no reason (No recent upgrades, VLAN is terting clean, POE has not failed)

Error message on the 3300 ICP (running version 4.0):

Source:    Heartbeat Server
Description:    ICP has lost contact with (192.168.34.34 (08-00-0F-48-E8-6D)), network driver cluster pool free: 3039 and low water mark: 3005
File Name and Line Number:    HeartbeatRecvTimeoutHandler.cpp;286

Thoughts?
appreciated.


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: remote IP phones randomly cut out
« Reply #1 on: January 10, 2011, 03:42:50 PM »
This would suggest to me that packets are dropping accross the VPN.
If you set up a continious ping (both directions) do you loose packets?

Are the phones set up in teleworker mode (you don't need a TW server to do this) or are you pointing to the 3300 via it's DHCP options?

You may want to verify that all your timer settings are correct in the controller registery form.

Ralph
Long Distance Service

Offline Mitelmindset

  • Contributer
  • *
  • Posts: 14
  • Karma: +0/-0
    • View Profile
Re: remote IP phones randomly cut out
« Reply #2 on: January 12, 2011, 10:52:28 AM »
Thank you for the reply....here is more insight....

This would suggest to me that packets are dropping accross the VPN.
If you set up a continious ping (both directions) do you loose packets?
I will test that this week great idea. I do have a service call into the Telco and like eveyone else I am waiting for response.

Are the phones set up in teleworker mode (you don't need a TW server to do this) or are you pointing to the 3300 via it's DHCP options?
I should have clarified this....my bad. The phone are connected to a DHCP host server in another office, same on that the PBX is in. I am using a VLAN extension in this case.

You may want to verify that all your timer settings are correct in the controller registery form.
Is there some suggestions for the timer settings?

 
 

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: remote IP phones randomly cut out
« Reply #3 on: January 12, 2011, 11:57:04 AM »
Quote
You may want to verify that all your timer settings are correct in the controller registery form.

Is there some suggestions for the timer settings?


Open the form then click the help button.  All the defaults are displayed there.   I've never had a system that used anything other than the default and when I screwed with ours I created a similar problem to the one you described.

Also, something you may want to try, is to turn off ICMP redirect.   There was an issue with 53xx phones with this so in your case it may not make a diff but it wouldn't hurt to turn it off for a day or two to see.

Ralph
« Last Edit: April 23, 2014, 04:31:57 PM by ralph »

Offline Mitelmindset

  • Contributer
  • *
  • Posts: 14
  • Karma: +0/-0
    • View Profile
Re: remote IP phones randomly cut out
« Reply #4 on: January 12, 2011, 01:47:14 PM »
Interesting point Ralph....

The phone reporting the issue are 5330 and 5312. I think I might try that....

another awesome suggestion

Thank you.
Terry

Offline swinstation

  • Jr. Member
  • **
  • Posts: 38
  • Karma: +3/-0
    • View Profile
Re: remote IP phones randomly cut out
« Reply #5 on: November 14, 2011, 11:09:39 AM »
dear Ralph
please tell me how can i disable ICMP ?acctually I have this problem on LX so can you tell me what is the seloution?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: remote IP phones randomly cut out
« Reply #6 on: November 14, 2011, 12:05:15 PM »
Turning off ICMP redirect is done in the data switches.
Here's the link on Cisco's site to do it:
www.cisco.com/E-Learning/bulk/public/celc/CRS/media/targets/4_2_5.swf

Ralph
« Last Edit: November 04, 2013, 10:34:10 AM by ralph »

Offline swinstation

  • Jr. Member
  • **
  • Posts: 38
  • Karma: +3/-0
    • View Profile
Re: remote IP phones randomly cut out
« Reply #7 on: November 14, 2011, 03:22:06 PM »
dear ralph

please , kindly tell me where i have to disable ICMP?
or if is possible please give more details about ICMP redirect.

and if I upgrade my ip phone firmware from R8 to 10.2 it will solve?

or can i upgrade my ip phones firmware?

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: remote IP phones randomly cut out
« Reply #8 on: November 14, 2011, 03:54:26 PM »
This link will show you how to turn off ICMP redirects.
www.cisco.com/E-Learning/bulk/public/celc/CRS/media/targets/4_2_5.swf

I don't know if an upgrade will help or not.

Ralph
« Last Edit: November 04, 2013, 10:33:51 AM by ralph »

Offline brantn

  • Sr. Member
  • ****
  • Posts: 270
  • Karma: +6/-0
    • View Profile
Re: remote IP phones randomly cut out
« Reply #9 on: November 14, 2011, 04:12:09 PM »
An upgrade will not necessarily fix the problem of a redirect certain sets respond differently to the redirect. A continuous wireshark should catch the redirect if it is happening.

Offline swinstation

  • Jr. Member
  • **
  • Posts: 38
  • Karma: +3/-0
    • View Profile
Re: remote IP phones randomly cut out
« Reply #10 on: November 16, 2011, 08:07:35 AM »
acctully I do not have router.


I have lx in my lan and some time ip phone disconnect and reconnect (very fast) and some times user dose not know when the set is idle.
I change timers in registry and it works truly,but I have to wait.

dear ralph thanks alot about your help.


 

Sitemap 1 2 3 4 5 6 7 8 9 10