Author Topic: CXi, voice mail ports and DSP resources  (Read 2501 times)

Offline ucx

  • Jr. Member
  • **
  • Posts: 55
  • Karma: +0/-0
    • View Profile
CXi, voice mail ports and DSP resources
« on: October 24, 2011, 07:19:36 PM »
We've got a 3300 CXi at a customers site, and they have only 4 VM ports programmed. In the 3300 I&M Course manual, it states:
"The case CX and CXi controllers allow up to 4 ports and, with increased DSP resources, up to 16 may be supported" (emphasis mine)
This site has the DSP card in port 3 - is this the increased DSp resources the manual references, or is there something else they will need?


Offline bluewhite4

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1041
  • Country: us
  • Karma: +20/-0
    • View Profile
Re: CXi, voice mail ports and DSP resources
« Reply #1 on: October 24, 2011, 09:19:49 PM »
You need to take a look at page 294, table 59 of the Technicians handbook. It all depends on if you have a Dual, Quad, or DSP II and then if you have a T1/E1 and/or compression licenses.

Also, the system won't increase the number of voicemail ports automatically, its a change/reboot that has to manually be done.

Hope that helps.

Offline ucx

  • Jr. Member
  • **
  • Posts: 55
  • Karma: +0/-0
    • View Profile
Re: CXi, voice mail ports and DSP resources
« Reply #2 on: October 24, 2011, 09:27:53 PM »
Awesome, thanks bluewhite :)


 

Sitemap 1 2 3 4 5 6 7 8 9 10