Author Topic: Mitel IVR and 3300 Queues  (Read 3806 times)

Offline CitySlacker

  • Jr. Member
  • **
  • Posts: 45
  • Country: gb
  • Karma: +0/-0
    • View Profile
Mitel IVR and 3300 Queues
« on: November 07, 2013, 05:39:06 AM »
Hi,

We have lots lines point to a queue and I need to find out how they are setup e.g:

0207 000 1000¦
0207 000 1001¦
1002                ¦----------------2000 Queue Path
1003                ¦
1004                ¦

How do i find out where and how these numbers are pointed at the 2000 queue path?  Is it in the Mitel IVR, the 3300?  The info just doesn't seem obvious to me.

Thanks,
Andy


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1225
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Mitel IVR and 3300 Queues
« Reply #1 on: November 07, 2013, 01:46:14 PM »
looking at the Trunk Service Assignment record for the trunks the calls come in on would be a good start. There's several different ways to route a DID/DDI call to a path with a different DN than the digits being passed from the telco, Trunk Service would be the first place to look for any incoming digit modifcation, then I'd look at System Speed Call Assignment.

Offline CitySlacker

  • Jr. Member
  • **
  • Posts: 45
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Mitel IVR and 3300 Queues
« Reply #2 on: November 08, 2013, 08:45:26 AM »
Thanks Lundah, do you know where I can find the Trunk Service Assignment record - I dont see this in the 3300?


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2209
  • Country: us
  • Karma: +67/-0
    • View Profile
Re: Mitel IVR and 3300 Queues
« Reply #3 on: November 08, 2013, 08:52:17 AM »
Might be Trunk Atrributes

Offline ghost

  • Full Member
  • ***
  • Posts: 185
  • Country: au
  • Karma: +11/-0
    • View Profile
Re: Mitel IVR and 3300 Queues
« Reply #4 on: November 08, 2013, 09:28:25 AM »
I would also check out hunt groups with call rerouting

Sent from my C6603 using Tapatalk


Offline CitySlacker

  • Jr. Member
  • **
  • Posts: 45
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Mitel IVR and 3300 Queues
« Reply #5 on: November 09, 2013, 03:13:39 AM »
I would also check out hunt groups with call rerouting

Thanks, i'll take a look.  I cant seem to find any relation between trunks, the DNIS and the internal queue.

Some speed calls point from the DNIS to the queue so that has solves a few, but there are still many outstanding where the dots don't join.

Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5768
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: Mitel IVR and 3300 Queues
« Reply #6 on: November 09, 2013, 12:42:35 PM »
Don't forget that when looking for a number in the 3300 you can go to maintenance commands and enter
Locate Number <number>

This will usually give you a clue as to where to look for the number.

Ralph

Offline CitySlacker

  • Jr. Member
  • **
  • Posts: 45
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Mitel IVR and 3300 Queues
« Reply #7 on: November 09, 2013, 02:16:35 PM »
Don't forget that when looking for a number in the 3300 you can go to maintenance commands and enter
Locate Number <number>

This will usually give you a clue as to where to look for the number.

Ralph

Nice, thanks Ralph - that's a great tip!


 

Sitemap 1 2 3 4 5 6 7 8 9 10