This is driving me mental!!
I've programmed the SIP trunk over to Lync as per the MOL guide and I just can't get it to work. I'm pretty sure the calls are hitting the Lync server but then my 5224 desk phone just shows busy.
Active Rejected Non-Auth Calls Auth Calls Auth Failures
Profile Calls Calls Incoming Outgoing Incoming Outgoing Incoming Outgoing
Lync 0 4 0 2 0 0 0 0
Total 0 4 0 2 0 0 0 0
There are 1 SIP link(s) programmed.
Link Lync state is IN SERVICE (link down count 0)
I now get the above. The output is showing calls as either Rejected or Non-Auth. When I'm dialling 4222 from my mitel desk phone (which is the dial in conf number on lync) it's coming as non auth. Is there a security setting I'm missing??