Author Topic: NuPoint Mailbox MWI type conversion.  (Read 3057 times)

Offline mitelmaniac

  • New Member
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
NuPoint Mailbox MWI type conversion.
« on: April 08, 2011, 04:42:29 AM »
Hi All,

I have about 5000 mailboxes and have tried the m1=<first mb number> m2=<last mb number> om1=3 mw1=28 command to convert all mailboxes from DTMF to Mitai. It didn't seem to do anything. Has anyone got any experience of this?

Thanks,
MM


Offline mitelmaniac

  • New Member
  • *
  • Posts: 4
  • Karma: +0/-0
    • View Profile
Re: NuPoint Mailbox MWI type conversion.
« Reply #1 on: April 08, 2011, 04:45:29 AM »
By the way its NPM 4.2 Standard addition.

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: NuPoint Mailbox MWI type conversion.
« Reply #2 on: April 08, 2011, 08:33:04 AM »
I think last time I did this I had to put all the mailboxs in a file one line at a time and run the convert as a shell script

so the file looked like this

m1=1001 om1=3 mw1=28
m1=1002 om1=3 mw1=28

I will see if I can find my notes but I honestly have no idea where they are.

Offline MitelUK2010

  • Sr. Member
  • ****
  • Posts: 201
  • Country: gb
  • Karma: +0/-0
    • View Profile
NuPoint Mailbox MWI type conversion.
« Reply #3 on: April 09, 2011, 07:16:05 AM »
Cant you just change, and put the range of mailboxes to change. Starting from lowest number to highest?


 

Sitemap 1 2 3 4 5 6 7 8 9 10