critical alarm system locksup

[montantece]

I have a 200ICP.  lockup in critical alarms
If  I capture the boot up sequence I retrieve the following:

machine check
Exception next instruction address: 0x010aa5e0
Machine Status Register: 0x0004b030
Condition Register: 0x84000842
Task: 0xd390000 "tAppStartup"
xfile: cannot write /db/xrtc file too big

If I perform a hard boot-up, It powers up correctly.  Am once I get to Maintenance logs:
The error is

Critical Alarm being raised detecting the following task suspended tDSP_WD 0X80d4000

What can I do?

[Chakara]

  Not to be a jerk - but I'd look at replacing it . . . . soon.

-Chak