Mitel Forums > Mitel MiVoice Business/MCD/3300

Outbound Caller ID

(1/2) > >>

swilson:
We recently installed a new T1 module and the outbound caller id isn't working.  It comes up unknown or private.  I compared the COS of the trunks to another controller that is working and there was no difference.  If anyone could enlighten me on this subject I would appreciate it.

~Stacey

v2win:
Do you have the following tables programmed?

DID Ranges for CPN Substitution

CPN Substitution

ralph:
I'm doing this from memory so bear with me....
You need to assign a DID index to it under the PRI assignment form.

Hope that points you in the right direction.
Ralph
www.AAVoicePro.com/mitel

modified:   Ah, I see V2win beat me to it.  - Thats what I was looking for.

MitelMania:
remember this only works for PRI, not a standard voice T1. also the telco should provide a default CPN on outbound calls.. so that if the remote CO switch doesnt receive the CPN from the mitel it will insert usually the BTN or main number of your property. the default would be something you would set up with the telco.
-Christopher

Chakara:
  It is also common for the telco to overwrite what you send - they have to have thier end set up correctly as well. 

  You can try the maintenance command:   ccs trace enable cont

  See if you can see the in and outbound caller ID information listed.....

-Chak

Navigation

[0] Message Index

[#] Next page