I was hoping someone may have the last version in the 4 meg magic bootrom image available before I scanned old drives. I do have a Ricoh pci to card bus card that will go into my burn setup. The value of the card is it can write either at 5V or 12V. All Mitel cards were/are 5V, but there were Intel cards that required 12V for the write. Mitel would boot from either.
The 4 meg card contains both the 2 meg Mitel 200 program, plus the second 2 meg for a bay control III upgrade. Think there is something still online under ICP for it. No longer have access, but able to share the program I used to flash these cards. Did work until Win7, but did look to install on Win10. I still need to put the card into my Win10 pc and see if I can read and write, software shows without issue and if requested, can provide.
