What are the Parameters configuring Mitel 5320e phone

[leezhijiang]

Hmm, I am a new user on Mitel series IP phones. Just got 2 unused units from Buyee. I have managed to set it up by downgrading the firmware via TFTP method pointing to someone else TFTP server and set it up via web-based administration page.

I have the below setup

- I have DHCP server running with Option with Code 66 and value pointing to 'http://172.16.30.4/provisioning', which is an Apache server with provisioning directory intended to place those files for provisioning

I am actually interested in knowing the below. I have searched around but no helpful info available

- How do I setup the provisioning files. What is the expected file format and file content with possible parameters (Any documentations available)
- How do I download firmware?

 

[johnp]

I have not tried this, but I just did a backup of my deskphone, altered the display value and saved it on my tftp server I used for firmware. Looks like the name of the file would be MN_macaddress.cfg
The request I saw was mac in capital letters. This did change my display after a reboot

[johnp]

Looked further at this and find that running tftp on Apache might be best. I could get http(s) working, but not anything where a user name and password would be required

[leezhijiang]

I have not tried this, but I just did a backup of my deskphone, altered the display value and saved it on my tftp server I used for firmware. Looks like the name of the file would be MN_macaddress.cfg
The request I saw was mac in capital letters. This did change my display after a reboot

OK. Will try this