Author Topic: SIP TRUNK  (Read 628 times)

Offline sadic

  • Contributer
  • *
  • Posts: 28
  • Country: ph
  • Karma: +0/-0
    • View Profile
SIP TRUNK
« on: September 17, 2024, 06:58:50 AM »
Hello Everyone,

I have a problem with my 3300 Mxe version 43.0.1.16 ICP for sip trunk. I have an incoming call, but I can't dial for outgoing. Can you pls tell me what is the possible cause issue

I really appreciated for your reply.

Thanks,

Sadic


Offline ralph

  • Mitel Forums Admin
  • Hero Member
  • *****
  • Posts: 5767
  • Country: us
  • Karma: +469/-0
  • Published Author: http://amzn.to/2dcYSY5
    • View Profile
Re: SIP TRUNK
« Reply #1 on: September 17, 2024, 07:33:44 AM »
There is a lot of things that can cause that.
What is the error you see on the phone's display when you try to dial out?

Ralph

Offline sadic

  • Contributer
  • *
  • Posts: 28
  • Country: ph
  • Karma: +0/-0
    • View Profile
Re: SIP TRUNK
« Reply #2 on: September 18, 2024, 08:51:07 AM »
hi ralph,

its show invalid on the screen of ip phone and fast busy for analog

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 692
  • Country: us
  • Karma: +17/-0
    • View Profile
Re: SIP TRUNK
« Reply #3 on: September 18, 2024, 10:59:33 AM »
It sounds like your ARS Digits dialed is not pointing to your SIP Trunk Route for outbound calls.

Offline sadic

  • Contributer
  • *
  • Posts: 28
  • Country: ph
  • Karma: +0/-0
    • View Profile
Re: SIP TRUNK
« Reply #4 on: September 27, 2024, 04:42:37 AM »
Thank you for all your reply, my issue was resolved. The cause of problem is from TELCO vendor.


Thank you very much for your support.


Sadic


 

Sitemap 1 2 3 4 5 6 7 8 9 10