Author Topic: Upgraded to 10.1 on 3300 and Oaisys is no longer recording agent calls  (Read 2125 times)

Offline rlafata

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +0/-0
    • View Profile
We upgraded our 3300 to release 10.1 and our Oaisys is showing on calls recorded that there is no audio.  We have a stand alone MBG and Oaisys server.  My vendor has been working on the issue for over a week with Mitel and still no resolution.  Anybody have any knowledge of this issue?  We plan on upgrading to the new Mitel Interactive Recorder. 


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1214
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
What release did you upgrade from, and what integration type are you using? There's a known issue with indirect recording not working on MiVB 10.0 and up on the MiVCR/Oaisys platform. Mitel did not fix it due to MiVCR/Oaisys already being EOL & end of support by the time MiVB 10.0 was released.

Offline dilkie

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 344
  • Karma: +11/-0
    • View Profile
indeed... see if indirect recording is being used and, if so, switch to direct recording (which means the sets being recorded have to connect to MBG).

Though I did think Mitel was fixing this on MiVB.

Offline rlafata

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +0/-0
    • View Profile
We upgraded from 9.4.  Mitel suggested direct routing from MBG but so far that has not fixed issue.

Offline rlafata

  • Jr. Member
  • **
  • Posts: 63
  • Karma: +0/-0
    • View Profile
Mitel finally gave us the correct information on direct routing to fix issue.  Thanks all.

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 692
  • Country: us
  • Karma: +17/-0
    • View Profile
Well done. What was the solution.

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1214
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
What release did you upgrade from, and what integration type are you using? There's a known issue with indirect recording not working on MiVB 10.0 and up on the MiVCR/Oaisys platform. Mitel did not fix it due to MiVCR/Oaisys already being EOL & end of support by the time MiVB 10.0 was released.

According to the release notes, the indirect recording problem on MiVCR is fixed in MiVB 10.1.


 

Sitemap 1 2 3 4 5 6 7 8 9 10