So I haven't done a Mitel installation for a long time, and this is the first one I have done that purely virtual and the analogs are all SIP extensions on a 48-port Grandstream...
I have a few instances where the Single Line SIP extensions are not ringing as part of groups.
First one is a 6930 desk phone and an analog cordless connected to a SIP extension on a Grandstream device (Full Service, stand-alone extension)... Calling the analog cordless directly works fine as does calling the 6930 desk phone, but if you call the Ring Group that is set to Ring All that contains both devices, only the 6930 rings.
For another user, we built a MDUG with a 6930 and a SIP extension both setup as Multi-User Devices under the same user, both can make calls fine, but when you call the Prime DN, only the deskphone rings and not the SIP analog extension.
Is there something unique about single line SIP extensions here? I am a little confused as to why this isn't working... I haven't done a MiVB install for a long time, but I have done hundreds and don't recall ever running across this before...