Remote Admin Access to Mitel TA7102

[ralph]

I've picked up a TA7102 to use as an interface for a fax machine in Las Vegas.
The problem I've come up against is that I can't access the admin interface unless I'm local on that network.
I need to install this on a network that's remote to me, so I need to ensure I have access.
When I look at the access control tab, the only options I see is Local or Radius.
Is there a way I can set it up to accept access from anywhere on our WAN?

Ralph

[ZuluAlpha]

In Management > Misc is your System Management Network Interface set to "All"?

[ralph]

Turns out, all I had to do is move my ethernet cable to the WAN port.
Then I was allowed to access remotely.

Now to get the dang thing actually working...
Ralph

[sarond]

Be careful if you connected the LAN port to the live network, by default the Mitel TA will be a DHCP on it's LAN port. IT guy might not be happy with you. 

[ralph]

Yeah, I saw DHCP was enabled by default. That surprised me.

Ralph

[ZuluAlpha]

When pulling a 3300 for hardware maintenance you can always count on me plugging back in to the WAN port instead of LAN port 1 when  re-racking it.

[ZuluAlpha]

Turns out, all I had to do is move my ethernet cable to the WAN port.
Then I was allowed to access remotely.

Now to get the dang thing actually working...
Ralph

Use this from Tech Electronics - http://mitelforums.com/forum/index.php?action=dlattach;topic=10306.0;attach=2786