Author Topic: MCD 4.2 SP1 on AX upgrade to MiVB 9.4  (Read 838 times)

Offline kuanwee.koh

  • New Member
  • *
  • Posts: 3
  • Karma: +0/-0
    • View Profile
MCD 4.2 SP1 on AX upgrade to MiVB 9.4
« on: September 19, 2022, 10:32:56 AM »
Is it possible to upgrade MCD 4.2 SP1 on AX to MiVB 9.4? Is it possible to re-use the AX?

Could someone shed some lights where to find these upgrading manuals?

Thank you very much


Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4064
  • Country: us
  • Karma: +129/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: MCD 4.2 SP1 on AX upgrade to MiVB 9.4
« Reply #1 on: September 19, 2022, 11:06:43 AM »
The manuals are all on the Mitel site but you must be a reseller to access them...

You will also need active SWA (SoftWare Assurance) with Mitel, and this would be a multi-step upgrade... I can't remember if you can go directly from 4.2 to 8.0, you might have to go to 6.0 first, but you have to get to 8.0, then do a migration from the old OS to Linux moving to 9.1, then you can upgrade to 9.4.

Honestly, this isn't something I would attempt as an end user... You should really engage your Mitel vendor as this is a fairly complex task with many steps and could vary depending on any other services you have like MiCollab, Teleworker, Call Recording, Call Center Management, etc. and it will involve a fair amount of downtime and prep work.   


 

Sitemap 1 2 3 4 5 6 7 8 9 10