Author Topic: ISP Failover - IP Change Breaks SIP Connection  (Read 966 times)

Offline josh_marchant

  • Jr. Member
  • **
  • Posts: 34
  • Country: gb
  • Karma: +0/-0
    • View Profile
ISP Failover - IP Change Breaks SIP Connection
« on: March 25, 2022, 04:13:28 AM »
I've recently set up an automatic failover from our main leased line connection to a backup ADSL one. When this happens our public IP address changes, and our Mitel 250 system is immediately unable to connect outside calls. A reboot of the system seems to fix the connection and allow the calls to go through, but once the connection switches back to the main leased line and the IP changes again it just loses connection again and requires another reboot.

We are using SIP trunks for our external calls.

Does anyone know if it's possible to prevent this and ensure it works seamlessly?


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1225
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: ISP Failover - IP Change Breaks SIP Connection
« Reply #1 on: March 25, 2022, 09:13:18 AM »
The 250 can't do it on it's own as the WAN IP is hard coded into the database. You'd have to put some sort of WAN failover device (i.e. Ecessa) at the edge to handle the failover.


 

Sitemap 1 2 3 4 5 6 7 8 9 10