« previous next »
Pages: [1]   Go Down

Author Topic: Single cell 112  (Read 1822 times)

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
Single cell 112
« on: March 17, 2022, 08:45:47 AM »
Hi guys
I'm trying to register 112 individual cells in teleworker mode, but it doesn't work.
Error: No sip reg.
I created generic sip phone 3233 with password 3233 mivb side.
Then, in micollab, I added the teleworking option for the 3233.

On the Mbg side, I added the 3233 extension in the teleworker -> Sip device menu.

did I miss something ?
Logged

Offline ACDeezNutz

  • Jr. Member
  • **
  • Posts: 41
  • Karma: +2/-0
    • View Profile
Re: Single cell 112
« Reply #1 on: April 15, 2022, 11:48:01 PM »
UC Endpoint is what the mobile app needs to be built as.  Generic SIP phone is for an ATA or 3rd party phone like a Yealink.
Logged

Offline mark.vanderheijden

  • Full Member
  • ***
  • Posts: 130
  • Country: nl
  • Karma: +8/-0
    • View Profile
Re: Single cell 112
« Reply #2 on: April 20, 2022, 06:21:07 AM »
Assuming you are using the single cell DECT 112. If I recall it correctly you need fill the SIP registrar in different places but I do not know exactly where unfortunally.
Logged

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 984
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Single cell 112
« Reply #3 on: April 25, 2022, 05:37:13 PM »
I resolved the issue, in mbg side need to enable to tick sip option
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10