Author Topic: New to MiVB and AX Controller  (Read 2944 times)

Offline jchristman2002

  • Jr. Member
  • **
  • Posts: 46
  • Karma: +1/-0
    • View Profile
New to MiVB and AX Controller
« on: January 09, 2022, 02:40:55 PM »
I did the Mitel MiVB training in 2015 and then again this past December, but we have been doing exclusively MiVoice Office 250 systems and I have not had to touch a MiVB system until now.  I have an AX controller with a DSP II MMC, a T1/E1 MMC, and a 4+12 Combo card.   I am trying to configure an analog extension for a fax machine on the on the 4+12 card and for the life of me I cannot figure out the PLID.   I guess my understanding of this number is all wrong.  We never actually discussed this in class and I have been through the engineer guide, hardware technical manual, general installation guide, technician's handbook, and troubleshooting guide as well as the Primer and for the life of me I am either too dense or missing it somewhere.

If anyone has a quick, this this this way of describing it for me that would be great.  Or at a minimu what would the PLID be for the first analog port on a 4+12 card in the first available slot in an AX controller.

Your help is so appreciated.   

Thanks,
Jon


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: New to MiVB and AX Controller
« Reply #1 on: January 09, 2022, 04:06:01 PM »
Under hardware moules asu is there a unit set? If so under card assignment has the card been set?

Offline jchristman2002

  • Jr. Member
  • **
  • Posts: 46
  • Karma: +1/-0
    • View Profile
Re: New to MiVB and AX Controller
« Reply #2 on: January 09, 2022, 04:08:06 PM »
Yep.  Port 1 Unit 3 AX Card Chasis

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: New to MiVB and AX Controller
« Reply #3 on: January 09, 2022, 04:23:47 PM »
Go to users advanced analog sets

Offline jchristman2002

  • Jr. Member
  • **
  • Posts: 46
  • Karma: +1/-0
    • View Profile
Re: New to MiVB and AX Controller
« Reply #4 on: January 09, 2022, 04:28:38 PM »
Its blank.

Offline jchristman2002

  • Jr. Member
  • **
  • Posts: 46
  • Karma: +1/-0
    • View Profile
Re: New to MiVB and AX Controller
« Reply #5 on: January 09, 2022, 04:40:52 PM »
forgot to attach

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: New to MiVB and AX Controller
« Reply #6 on: January 09, 2022, 04:53:28 PM »
Sure card assignment is filled out?

Offline jchristman2002

  • Jr. Member
  • **
  • Posts: 46
  • Karma: +1/-0
    • View Profile
Re: New to MiVB and AX Controller
« Reply #7 on: January 09, 2022, 05:09:50 PM »
Bingo.  That is what I missed. 

Thanks for ht help.  On a Sunday no less.  :)


 

Sitemap 1 2 3 4 5 6 7 8 9 10