Author Topic: CIM Connection Port  (Read 2861 times)

Online san_typ

  • Jr. Member
  • **
  • Posts: 47
  • Country: ec
  • Karma: +0/-0
    • View Profile
CIM Connection Port
« on: October 28, 2021, 09:51:14 AM »
Dear:

Good morning, I am trying to configure an ASUS II via "CIM" on a Mitel Mxe III but I have no experience in these configurations, please your help with a manual or the steps that I must follow to configure.
And if you can confirm that:
1) Is the CIM cable a crossover cable?
2) What is the maximum distance the CIM cable reaches?

Thank you for the information you can give me.


Offline bajangerry

  • Jr. Member
  • **
  • Posts: 73
  • Country: ky
  • Karma: +1/-0
    • View Profile
Re: CIM Connection Port
« Reply #1 on: October 28, 2021, 11:44:33 AM »
Ethernet Crossover cable (not a std. cable) and can be located up to 30 meters (100 feet) long. Connect the ASU-II to the CIM 1 port then power up the ASU-II and the controller will auto-detect it.

The built-in HELP screen on the 3300 should be able to guide you from here.

Online san_typ

  • Jr. Member
  • **
  • Posts: 47
  • Country: ec
  • Karma: +0/-0
    • View Profile
Re: CIM Connection Port
« Reply #2 on: October 28, 2021, 04:56:15 PM »
Dear:

Do you know if there is a way to extend the distance of 30 m?

Thanks for your help.
An excellent afternoon.

Best Regards,
Santiago P

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: CIM Connection Port
« Reply #3 on: October 28, 2021, 05:49:58 PM »
No, they are not IP based... It must be within 33m... It uses a proprietary ATM protocol to communicate. You used to be able to get a fiber interface that would could run for several kilometers, but that isn't available anymore.

Online san_typ

  • Jr. Member
  • **
  • Posts: 47
  • Country: ec
  • Karma: +0/-0
    • View Profile
Re: CIM Connection Port
« Reply #4 on: October 29, 2021, 11:34:01 AM »
Thanks for your valuable help.

Offline imanm93

  • Jr. Member
  • **
  • Posts: 76
  • Country: au
  • Karma: +0/-0
  • Keep it simple!
    • View Profile
    • Iman Mohammadi's Blog
Re: CIM Connection Port
« Reply #5 on: October 29, 2021, 05:44:49 PM »
If you tend to use it for distances more than 33m, you should check some third party devices to transmit layer 1 connections over fiber optic or etc.

Offline ZuluAlpha

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 692
  • Country: us
  • Karma: +17/-0
    • View Profile
Re: CIM Connection Port
« Reply #6 on: November 01, 2021, 04:06:25 PM »
If you tend to use it for distances more than 33m, you should check some third party devices to transmit layer 1 connections over fiber optic or etc.

Usually that works with IP but since these aren't actually IP based I have not been able to get those to work (I have tried). For analog connections over 30M you will have to use some nature of feeder cable (like a 25 or 50 pair copper cable) and then cross-connect to where your ASU terminates or you can use an analog to SIP adapter like the TA-7100 which goes on the network at the far end.

Online san_typ

  • Jr. Member
  • **
  • Posts: 47
  • Country: ec
  • Karma: +0/-0
    • View Profile
Re: CIM Connection Port
« Reply #7 on: November 08, 2021, 08:22:49 AM »
Thank you for your valuable help, it is clear to me.


 

Sitemap 1 2 3 4 5 6 7 8 9 10