« previous next »
Pages: [1]   Go Down

Author Topic: Acceptable version gap between server and Micollab client?  (Read 1109 times)

Offline divadiow

  • Contributer
  • *
  • Posts: 13
  • Country: gb
  • Karma: +0/-0
    • View Profile
Acceptable version gap between server and Micollab client?
« on: August 25, 2021, 03:54:51 AM »
Hello.

Is there a maximum server/micollab client version mismatch that's acceptable when depoying the latest Micollab MSI?

For example, I have server version 9.2.0.202 and have deplyed micollab 9.2.153. Can we use 9.3 without any issues? Could we use 9.4 if one is released?
Logged

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1161
  • Country: us
  • Karma: +62/-0
  • Senior Chief Grunt
    • View Profile
Re: Acceptable version gap between server and Micollab client?
« Reply #1 on: August 25, 2021, 08:12:17 AM »
I've used 9.3 client with 9.1 servers before with no issues.
Logged

Offline NEPhoneGuy

  • Global Moderator
  • Sr. Member
  • *****
  • Posts: 218
  • Country: us
  • Karma: +5/-0
    • View Profile
Re: Acceptable version gap between server and Micollab client?
« Reply #2 on: August 25, 2021, 08:23:16 AM »
Check the release notes - they usually specify what version has been tested or approved.
Can find these in the KMS or next to the download article in the Software Download Center.

Depends on the Server Type but the versions supported are listed on page 13.
Logged

Offline divadiow

  • Contributer
  • *
  • Posts: 13
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: Acceptable version gap between server and Micollab client?
« Reply #3 on: August 25, 2021, 08:29:20 AM »
thanks both

We dont have access to the support center ourselves, we have to go through a vendor, and getting info out of them is a slow painful process.

I cannot find publicly available release notes. only these https://www.mitel.com/en-gb/document-center/applications/collaboration/micollab/micollab-client
Logged

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 980
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Acceptable version gap between server and Micollab client?
« Reply #4 on: August 27, 2021, 04:20:08 AM »
i'm using Micollab server 8 with micollab client 9.2
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10