Author Topic: MiVB Telephone Directory and Micollab  (Read 1694 times)

Offline richmckevitt

  • Contributer
  • *
  • Posts: 15
  • Country: gb
  • Karma: +0/-0
    • View Profile
MiVB Telephone Directory and Micollab
« on: June 29, 2021, 04:32:54 AM »
Hi - I am running Micollab 9.2.0.104-01 & MiVB Release level: 9.1 SP2. One thing that would be really handy is for an agent using Micollab to be able to see/search the Telephone Directory in MiVB. When doing a Micollab search it will show you other users with exts but it does not show you when searching for a name against a speedcall for example although it is in the Telephone Directory. Is there any way of setting this up

Cheers for the help as always

Rich


Offline teqwize

  • Jr. Member
  • **
  • Posts: 41
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: MiVB Telephone Directory and Micollab
« Reply #1 on: June 30, 2021, 10:55:56 AM »
Micollab does not show entries from the MiVB directory.
If your MiCollab is connected to AD create an AD user/contact and save the user in Micollab as a contact, or create a phantom extension in micollab with the speed dial.
When I researched this I was also hoping for a better answer...

Offline richmckevitt

  • Contributer
  • *
  • Posts: 15
  • Country: gb
  • Karma: +0/-0
    • View Profile
Re: MiVB Telephone Directory and Micollab
« Reply #2 on: October 14, 2021, 07:55:58 AM »
Cheers for the reply and apologies for delayed response.  Typical Mitel really where they make simple things difficult!

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: MiVB Telephone Directory and Micollab
« Reply #3 on: October 14, 2021, 08:04:50 PM »
You can aleays create an entry in MiCollab and with newer version assign a phantom number. In the past, I assigned other telephone. Either should provide an entry that may appear as gray, but should be dialable.


 

Sitemap 1 2 3 4 5 6 7 8 9 10