« previous next »
Pages: [1]   Go Down

Author Topic: MIVB Ax controller no dial tone after seizure of pri line on analog extension  (Read 926 times)

Offline abmitel

  • Jr. Member
  • **
  • Posts: 71
  • Country: in
  • Karma: +0/-0
    • View Profile
MIVB Ax controller no dial tone after seizure of pri line on analog extension
« on: June 12, 2021, 02:49:08 AM »
Hi

i dont get pstn dialtone on analog extension when user dials pri access code , i have enabled second dial tone =yes in ARS leading digit

Regards

Logged

Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4099
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
Re: MIVB Ax controller no dial tone after seizure of pri line on analog extension
« Reply #1 on: June 12, 2021, 10:51:35 AM »
PRI's don't provide dialtone in general, they don't use DTMF so why prompt a user for a tone... You would simulate that by providing dialtone from the system after the leading digit.
Logged

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2201
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: MIVB Ax controller no dial tone after seizure of pri line on analog extension
« Reply #2 on: June 13, 2021, 06:17:53 PM »
If he is talking about return dial tone after leading digit, then there is an issue, unless there are no additional digits to analyze
Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10