Author Topic: MIVB Ax controller no dial tone after seizure of pri line on analog extension  (Read 938 times)

Offline abmitel

  • Jr. Member
  • **
  • Posts: 71
  • Country: in
  • Karma: +0/-0
    • View Profile
Hi

i dont get pstn dialtone on analog extension when user dials pri access code , i have enabled second dial tone =yes in ARS leading digit

Regards



Offline acejavelin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4100
  • Country: us
  • Karma: +133/-0
  • High-tech, heavy metal redneck!
    • View Profile
    • Like what I do and wanna help out? Send me a donation!
PRI's don't provide dialtone in general, they don't use DTMF so why prompt a user for a tone... You would simulate that by providing dialtone from the system after the leading digit.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
If he is talking about return dial tone after leading digit, then there is an issue, unless there are no additional digits to analyze


 

Sitemap 1 2 3 4 5 6 7 8 9 10