Where to find version of SysAdmin tool that allows changing IP ports?

[lundah]

I have a customer with a system running 6.2.3.53, and the HTTPS port has been customized from 443 to 1443. When loading new/upgraded PC's for the customer admins, the only version of the SysAdmin tool (6.3.9.102) does not appear to allow changing these ports. Anyone know if it's possible to change the port assignments somewhere in the 6.3 SysAdmin tool, or where I can find a copy of the 6.2.3.53 tool installer?

[Tech Electronics]

lundah,

If I understand your question correctly then I believe what you are looking for is under the Manage Connections and then open up the individual connection you want to access via a different port.

Of course you have to change it in DB Programming under IP Settings before changing it in Manage Connections in the SA&D program.

Thanks,

TE

[sarond]

In SA&D you have to enable IP Ports to be seen on the connections. You only enable it once so it's easy to forget.
Options > Advanced > Show IP Ports.

[lundah]

In SA&D you have to enable IP Ports to be seen on the connections. You only enable it once so it's easy to forget.
Options > Advanced > Show IP Ports.

That's exactly what I was looking for, thank you!

[sarond]

No worries, I always forget it on new SA&D installs myself. I usually change the SSH and HTTPS ports of my installs.