Install software via FTP and VXworks

[Chris Buonanno]

Hi, I'm trying to install the software by changing the boot parameters in VxWorks but it just doesn't work, these are the settings I'm using:

boot device          : motfcc
unit number          : 0
processor number     : 0
host name            : bootHost
file name            : Boot_Install
inet on ethernet (e) : 192.168.1.2:ffffff00
host inet (h)        : 192.168.1.3
gateway inet (g)     : 192.168.1.1
user (u)             : ftp
ftp password (pw)    : ftp
flags (f)            : 0x0
other (o)            : FixPartition

I have an ftp server running on my laptop with correct IP but I get this message when it fails:

boot device          : ???motfcc
unit number          : 0
processor number     : 0
host name            : bootHost
file name            : Boot???Boot_Install
inet on ethernet (e) : 192.168.1.2:ffffff00
host inet (h)        : 192.168.1.3
gateway inet (g)     : 192.168.1.1
user (u)             : ftp
ftp password (pw)    : ??ftp
flags (f)            : 0x0
other (o)            : ?fixpartition???FixPartition

Can't load boot file!!

I'm trying to install MCD 6.0 as it's on a test system basically for practice

Any ideas or am I missing something?

Thanks in advance.

[ZuluAlpha]

Chris, make sure in Putty that you re-type those settings exactly - no backspace to correct errors. If you commit an error do it again before hitting @ to reboot with the correct changes.

Also turn the firewall completely off on your PC.

[sunspark]

What type of ftp server are you using?  Di you unzip the files in the ftp folder?

[acejavelin]

Make sure to disable the Windows Firewall, or any other firewall software you have...