Author Topic: Micollab doesn't notified the incoming call with Mivoice Business  (Read 1394 times)

Offline MiSam

  • Jr. Member
  • **
  • Posts: 31
  • Country: ca
  • Karma: +0/-0
    • View Profile
Hi Guys,

I have HotDesk extension 2199 assigned it to one of the 6920 phones, now I created 3 dummy lines (2701-2703) and set them as Key System on the first three buttons for ext 2199.
I set up the incoming call to ring on Huntgroup 2801 and I programmed the 3 dummy lines as a member for this Huntgroup.
I can see the incoming call ring on the 6920 phones but I can't see any notification on micollab application on my laptop?
and If I call the ext 2199 directly from another extension or from outside, I can see the notification popup on my laptop screen

Any Idea?

Reagrds,


Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Micollab doesn't notified the incoming call with Mivoice Business
« Reply #1 on: February 03, 2021, 07:35:25 PM »
You need to create a second extension for your main line as uc endpoint. Then create a multidevice group

Offline MiSam

  • Jr. Member
  • **
  • Posts: 31
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: Micollab doesn't notified the incoming call with Mivoice Business
« Reply #2 on: February 03, 2021, 10:07:34 PM »
You need to create a second extension for your main line as uc endpoint. Then create a multidevice group

Thank you for your reply, the problem I run out of the Licenses to create a new UC user
Is there any other way?

Offline sunspark

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 986
  • Country: mx
  • Karma: +16/-1
    • View Profile
Re: Micollab doesn't notified the incoming call with Mivoice Business
« Reply #3 on: February 04, 2021, 05:01:03 AM »
2199 should be : multidevice (license) = deskphone
2*199  : multidevice license = sofphone


then create multidevice groupe 2199 put in 2199+ 2*199

Offline MiSam

  • Jr. Member
  • **
  • Posts: 31
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: Micollab doesn't notified the incoming call with Mivoice Business
« Reply #4 on: February 04, 2021, 08:51:11 AM »
2199 should be : multidevice (license) = deskphone
2*199  : multidevice license = sofphone


then create multidevice groupe 2199 put in 2199+ 2*199

I already created two multidevice for the main ext 2199 and for the softphone 2*199, see image below.
My issue started when the caller dial ext 2701 or ext 2702, I didn't get a notification on my micollab, please see the second image

Offline MiSam

  • Jr. Member
  • **
  • Posts: 31
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: Micollab doesn't notified the incoming call with Mivoice Business
« Reply #5 on: February 04, 2021, 04:02:03 PM »
Issue Solved by restarting PBX_PROXY service in MiCollab Client Service Diagnostics.


 

Sitemap 1 2 3 4 5 6 7 8 9 10