Adtran 908e in front of Mitel 250

[mem94043]

Anyone know where I can find/hire an ADTRAN programmer? I have an ADTRAN 908e I want to setup so that I can move my client's MV250 off of a TPX PRI over to the PRI port on the back of the ADTRAN (fed by SIP trunks on front end).

Thanks!

Mike

[Tech Electronics]

mem94043,

You do realize that the MiVO-250 can take the SIP Trunks directly into itself; right?

All you need to get are SIP Trunk Licenses for how many SIP Channels you are receiving.

As for the Adtran 908e those are pretty intuitive to work on, but there is nothing specific on this site for working on Adtran devices. If you are wanting help from a forum that has people who really know it well then go here.

Adtran Total Access 900/900e Series

Thanks,

TE

[mem94043]

Yes, we do direct SIP often on the MV250. Unfortunately, my client is already doing trunk-side 'cradle-to-grave' call recording on their existing PRI so we have to keep that interface in place so they can continue using their call recording server. We are planning to use the Adtran to bring in SIP but deliver PRI to the Mitel.

Mike

mem94043,

You do realize that the MiVO-250 can take the SIP Trunks directly into itself; right?

All you need to get are SIP Trunk Licenses for how many SIP Channels you are receiving.

As for the Adtran 908e those are pretty intuitive to work on, but there is nothing specific on this site for working on Adtran devices. If you are wanting help from a forum that has people who really know it well then go here.

Adtran Total Access 900/900e Series

Thanks,

TE