Yealink SIP DECT Phone Do not Disturb Code

[josh_marchant]

I've just go a Yealink W60B base station and W59R DECT phone. I've got it all connected to a SIP extension, and I can see there is configuration on the base station for a Do Not Disturb code. I've tried entering the feature code in here, but when activating DND on the handset and calling it from another extension it just says 'Call Cannot Be Completed' instead of the normal do not disturb message. 

I've attached a screenshot of the base configuration.

Does anyone know which code needs to be entered to get this functioning correctly?

[Tech Electronics]

josh_marchant,

Well 370 and 371 are the default feature codes for DND On and DND Off, respectively, and you should be able to see if the phone is in DND, but being a SIP Device I am not so sure how it will react when you call it.

You can verify those codes if you look here: System > Device and Feature Codes > Feature Codes > Do-Not-Disturb and Do-Not-Disturb Cancel.

Thanks,

TE