Firewall Slows Down MBG

[brogerson]

Trying to get Collab Client working as a teleworker and the customer put a network address translation in his firewall to point the external IP to the Teleworker MBG and now when you browse to the MBG it takes a long time to get into it and moving around the menu options are very slow.

When the NAT is removed the MBG works as normal.

[lundah]

What network profile are you using on the MBG? Should be set up in a DMZ, and I've found you have to override the set-side ICP address with the external IP even though the documentation says to set it up in server-only.

[johnp]

What network profile are you using on the MBG? Should be set up in a DMZ, and I've found you have to override the set-side ICP address with the external IP even though the documentation says to set it up in server-only.

I most always set to custom in this config and do the same

[lundah]

What network profile are you using on the MBG? Should be set up in a DMZ, and I've found you have to override the set-side ICP address with the external IP even though the documentation says to set it up in server-only.

I most always set to custom in this config and do the same

Yep, any time I've tried the documented recommended settings in a DMZ it never works unless I do this.