Author Topic: Firewall Slows Down MBG  (Read 1058 times)

Offline brogerson

  • Full Member
  • ***
  • Posts: 100
  • Country: ca
  • Karma: +1/-0
    • View Profile
Firewall Slows Down MBG
« on: August 13, 2020, 08:38:10 AM »
Trying to get Collab Client working as a teleworker and the customer put a network address translation in his firewall to point the external IP to the Teleworker MBG and now when you browse to the MBG it takes a long time to get into it and moving around the menu options are very slow.

When the NAT is removed the MBG works as normal.


Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Firewall Slows Down MBG
« Reply #1 on: August 13, 2020, 08:50:17 AM »
What network profile are you using on the MBG? Should be set up in a DMZ, and I've found you have to override the set-side ICP address with the external IP even though the documentation says to set it up in server-only.

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Firewall Slows Down MBG
« Reply #2 on: August 13, 2020, 05:18:57 PM »
Quote
What network profile are you using on the MBG? Should be set up in a DMZ, and I've found you have to override the set-side ICP address with the external IP even though the documentation says to set it up in server-only.

I most always set to custom in this config and do the same

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Firewall Slows Down MBG
« Reply #3 on: August 13, 2020, 07:05:44 PM »
Quote
What network profile are you using on the MBG? Should be set up in a DMZ, and I've found you have to override the set-side ICP address with the external IP even though the documentation says to set it up in server-only.

I most always set to custom in this config and do the same

Yep, any time I've tried the documented recommended settings in a DMZ it never works unless I do this.


 

Sitemap 1 2 3 4 5 6 7 8 9 10