Internal 7/10 digit dialing showing wrong caller ID Number

[jascrous]

First off, i realize users dont/shouldnt be using 7/10 digit dialing internally, but they are.  That is what it is.

Issue:
7/10 Digit dialing back into ourselves is showing an incorrect System Default Caller ID Number.  Can someone tell where to find this config item.

7/10 Digit dialing to external numbers shows correct System Default Caller ID Number.

Thoughts?

[ZuluAlpha]

When you dial externally, there is one default Caller ID that is shown?

[jascrous]

Yes, we have one default caller ID number for external calls.  Calls to non owned numbers show the correct caller ID.  Its just internal 7/10 digit that is showing incorrectly.

[johnp]

If it takes the same path out as calls to other customers the caller id should be the same one they see. I would be calling the carrier if this is is the case. I would also look to block the users from dialing something they can reach internally so as not to waste trunk capacity