No Teleworker Mode icon for 6940 phone

[ScottL]

We're replacing older phones with 6940s. I want to put them in Teleworker mode, but I can't see it in Settings. Nothing under Advanced, either. Our firmware version is 01.05.00.071.

Thank you for your help,

Scott

[acejavelin]

Did you try just holding 7 when you connect the phone and boot? Not sure that works on a 6940, but there absolutely should be an icon for Teleworker in the 6940 settings menu. Go to Settings - Advanced - Network - Config Teleworker.

[lundah]

It's hiding under the "Voice Services" menu option.

[ScottL]

Hi lundah, under Voice Services I see MiCloud Connect, MiVoice Connect, and MiVoice Border Gateway. Which is the correct one to use?

Thank you,

Scott

[lundah]

MiVoice Border Gateway. Then enter the IP of your MBG WAN/Internet facing address.

[ScottL]

It's hiding under the "Voice Services" menu option.

I tried that, it didn't work.

Scott

[trevorh]

Were you able to get it figured out? I'm trying to do the same thing, and having the same problem.

[lundah]

Have to go into the "Advanced" menu to see it. The default admin passcode for 69xx phones in MiNet mode is 73738.

[sunspark]

another method :

go to advance setting ( default password 73738)  --> then factory reset , after rebooting , the first thing that the screen will display is : MBG teleworker

[bigyorkshire]

I've found mashing the Settings button on boot 'the button with a cog' usually works and lets me select from MiVoice Connect or MiVoice Border Gateway