« previous next »
Pages: [1]   Go Down

Author Topic: Nupoint VM Call Details  (Read 1406 times)

Offline rgardeck

  • Jr. Member
  • **
  • Posts: 44
  • Country: us
  • Karma: +0/-0
    • View Profile
Nupoint VM Call Details
« on: June 22, 2020, 02:09:23 PM »
Our Nupoint system sends all voicemails to our Outlook mailboxes. Our Nupoint currently only sends recorded voicemail as attachment. Is there a way to force Nupoint to also include caller ID (phone number,etc) in the body of an email for example?
Logged

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Nupoint VM Call Details
« Reply #1 on: June 22, 2020, 04:13:51 PM »
If you have the FCOS settings set correctly, the calling number should be included in the email.
Logged

Offline rgardeck

  • Jr. Member
  • **
  • Posts: 44
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Nupoint VM Call Details
« Reply #2 on: June 23, 2020, 01:25:45 PM »
Any ideas as to which number FCOS it would be?
Logged

Offline lundah

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1216
  • Country: us
  • Karma: +66/-0
  • Senior Chief Grunt
    • View Profile
Re: Nupoint VM Call Details
« Reply #3 on: June 23, 2020, 05:38:45 PM »
That's going to depend on how your particular system is configured. What I can tell you, though, is the FCOS that the mailbox uses needs to have bit 262 and 263 enabled to store the inbound caller ID in the message data.
Logged

Offline mark.vanderheijden

  • Full Member
  • ***
  • Posts: 130
  • Country: nl
  • Karma: +8/-0
    • View Profile
Re: Nupoint VM Call Details
« Reply #4 on: June 29, 2020, 04:51:18 AM »
You have to enable this FCOS: 260-264 and 280.

Logged

Pages: [1]   Go Up
« previous next »
 

Sitemap 1 2 3 4 5 6 7 8 9 10