Author Topic: Message Waiting Light not working  (Read 2142 times)

Offline rkowals

  • Jr. Member
  • **
  • Posts: 40
  • Country: us
  • Karma: +0/-0
    • View Profile
Message Waiting Light not working
« on: March 04, 2020, 05:03:01 PM »
SX-200_ICP, MWI not working, does light up for incoming calls, just not for waiting messages.


Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Message Waiting Light not working
« Reply #1 on: March 04, 2020, 06:27:58 PM »
I would check cos for the voicemail ports. Also need to know if all are programmed and within the hunt group. Have any been changed to use as RAD port?

Offline rkowals

  • Jr. Member
  • **
  • Posts: 40
  • Country: us
  • Karma: +0/-0
    • View Profile
Re: Message Waiting Light not working
« Reply #2 on: March 05, 2020, 02:26:43 PM »
All the VM use COS #6, I do not see option 232, but is that needed?  Is there a particular Option Number is needed. 

Offline johnp

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2202
  • Country: us
  • Karma: +66/-0
    • View Profile
Re: Message Waiting Light not working
« Reply #3 on: March 05, 2020, 07:13:36 PM »
I attached a pdf from the manual


 

Sitemap 1 2 3 4 5 6 7 8 9 10