Author Topic: 112 DECT PHONE (UNIVERSAL) AND RFP 12 SINGLE CELL BASE STATION INSTALLATION  (Read 1259 times)

Offline gimitel

  • Sr. Member
  • ****
  • Posts: 205
  • Karma: +0/-0
    • View Profile
Hi Guys,

I am programming an 112 Dect phone with RFP 12 single cell base station, but cannot get the sip extension on handset working.
The looks like sip ext register like for a few seconds and then unregister again. I have only Cat D license on the system.

Can some help me with this one. Or is there a link so i can see how to program it ?

Best Regards,

Gimitel


Offline sarond

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 1404
  • Country: au
  • Karma: +73/-0
    • View Profile
You're going to need a Cat F license I'm pretty sure (SIP License)

Offline Magpye

  • Full Member
  • ***
  • Posts: 134
  • Country: gb
  • Karma: +10/-0
    • View Profile
^
Correct, it needs a SIP license (CAT F)

Offline gimitel

  • Sr. Member
  • ****
  • Posts: 205
  • Karma: +0/-0
    • View Profile
Hi Guys,

I have now CAT F License.
But still i cannot get the sip register. I keep getting SIP Error. I programmed the username and password in the Authorization form (inbound) but still the same error.

Can someone help?

Thanks,

Gimitel

Offline Markpie

  • New Member
  • *
  • Posts: 4
  • Country: us
  • Karma: +0/-0
    • View Profile
Did you get this figured out?  I've done quite a few of these and have encountered probably every issue. 


 

Sitemap 1 2 3 4 5 6 7 8 9 10