Web configuration problem.

[Migue]

Hello comunity 

I have a Mitel 5312 IP device, which I configure in SIP mode, and in order to complete the configuration I have to put the address of the server that registers with its respective port, however my problem is that having the HTTP port enabled I can not access the web configuration is not a problem of the cable path since I change it repeatedly, I assigned IP address both static and dynamic, however I can not access the web configuration, check the connectivity between the computer and my PC giving positive results, but I can not access.

I will be very grateful for your collaboration in providing a solution or alternatives.

Best regards.

[johnp]

Are you logging in as admin with the correct password?

[Migue]

Of course, in fact I have not made any modification, the equipment is as it is after restoring it in its factory state, I recently investigated this matter and I understood that this problem is due to the fact that its firmware version is (06.05.00.15 ), which Mitel rejected this option of web configuration, I suppose that my only alternative would be to implement a firmware that is adequate to access that web interface ... but the other problem is where I get that firmware.
The right thing to say is a matter of firmware, or do you think there may be another alternative?

Thank you so much

[johnp]

http://mitelforums.com/forum/index.php?topic=11111.0 the files I am sharing should have what you need

[Migue]

Yes, this problem is very common in SIP phones with older models, I already found the solution, thank you very much for your help.