Author Topic: CSV import to Nupoint  (Read 6110 times)

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
CSV import to Nupoint
« on: September 22, 2008, 02:45:57 PM »
There used to be a CSV import utility to the Nupoint but I cant seem to find any documentation does anyone know how to do it?


Offline Mitel100

  • Sr. Member
  • ****
  • Posts: 262
  • Country: gb
  • Karma: +6/-0
    • View Profile
Re: CSV import to Nupoint
« Reply #1 on: September 22, 2008, 04:33:01 PM »
You wont find any information in scripting the Nupoint, as acording to product support, they do not support it.

I know how to create these text files, but I do not have any docs on them. I will see what I can put together and post a sample script.

Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: CSV import to Nupoint
« Reply #2 on: September 24, 2008, 11:46:17 AM »
I figured out most of it but I couldn't figure out how to do the password field.

Any idea?

Offline Mitel100

  • Sr. Member
  • ****
  • Posts: 262
  • Country: gb
  • Karma: +6/-0
    • View Profile
Re: CSV import to Nupoint
« Reply #3 on: September 24, 2008, 02:44:34 PM »
To reset the passcode is as follows:

asetpass m1= pw=


Offline v2win

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 628
  • Country: us
  • Karma: +11/-0
    • View Profile
Re: CSV import to Nupoint
« Reply #4 on: September 24, 2008, 03:19:08 PM »
I was hoping to do this in the acreate field

acreate m1=1234 id=smith,bob pw=1234


Offline Mitel100

  • Sr. Member
  • ****
  • Posts: 262
  • Country: gb
  • Karma: +6/-0
    • View Profile
Re: CSV import to Nupoint
« Reply #5 on: September 25, 2008, 04:22:34 PM »
I don't think you can do it this way, but I have never tried. I have always been told to do it seperatly.

Offline socadan

  • New Member
  • *
  • Posts: 1
  • Karma: +0/-0
    • View Profile
Re: CSV import to Nupoint
« Reply #6 on: September 21, 2012, 12:57:16 PM »
There is now an import utility built in to NUM3.0.
A Mailbox Data file can be created using a spreadsheet program that can then be imported into the NuPoint. The data for each mailbox is organized into ordered columns with each line representing a new mailbox.
This import file does not allow for configuration of FCOS, LCOS or different types of MWI other than DTMF. These can easily be set using the asetpass command from the command line rather than accessing each mailbox separately.


 

Sitemap 1 2 3 4 5 6 7 8 9 10