Author Topic: Setting up 6930 on 3300  (Read 3440 times)

Offline dcluser

  • Contributer
  • *
  • Posts: 5
  • Country: ca
  • Karma: +0/-0
    • View Profile
Setting up 6930 on 3300
« on: August 22, 2019, 09:22:08 AM »
Good morning,

How do you program a 6930 phone, on a 3300 switch, so that you can enable BlueTooth (BT) on the phone?

Under Users and Devices > User and Services Configuration > Service Profile tab:  I set the device type for a new extension to 6930 IP.  I set up the rest of the extension the same way we've been setting up 5300 series phones for years.  When I power up the 6930 IP phone everything looks great but there doesn't appear to be any way in the settings to enable BT on the phone.  From the settings button I went through all the menus I could access, but nothing is listed about BT.  I tried to access the Advanced menu to see if the BT options were listed there, but the phone displays a message indicating that, "Administrator access is disabled".  How do I enable administrator access, presuming this is where the BT options are hidden, or am I looking in the wrong place completely?

Your assistance is greatly appreciated.


Offline petr.necas

  • Sr. Member
  • ****
  • Posts: 393
  • Country: cz
  • Karma: +8/-0
    • View Profile
Re: Setting up 6930 on 3300
« Reply #1 on: August 22, 2019, 10:48:28 AM »
The password can be set in System Administration Tool in System Properties -> System Administration -> System Security Management -> Phone Administrator Passcode.

You can also try to use the default password: 73738

Offline dcluser

  • Contributer
  • *
  • Posts: 5
  • Country: ca
  • Karma: +0/-0
    • View Profile
Re: Setting up 6930 on 3300
« Reply #2 on: August 22, 2019, 03:52:12 PM »
Thank you pert.necas.  That allowed me to log into the advanced features and enable BlueTooth.

  :D


 

Sitemap 1 2 3 4 5 6 7 8 9 10