Problem with system upgrade

[benve_97]

Hi everyone, i have a problem with the firmware upgrade of the 3300 cxi II controller, last month i've succesfully upgrade the firmware from the MiVB 8.x to the 9.0.x.x using the migration tool and everything works fine. Last week I've tried to log in to the controller but after many times that i can't get in I decide to reset the system software using conosolle commands. Then i have try many times to reinstall MiVB 9.0.x.x ( i've tried different versions) but every time i got the error showed in the pic , for the system install i use commands in the other pic , from TFTPD64's sys log i see that everything is ok so the system software is correctly put on the controller but everytime i got the same error , I hope someone can help me.

[sunspark]

try to reset your hard drive with the command FixPartition , then reinstall the V9

[benve_97]

try to reset your hard drive with the command FixPartition , then reinstall the V9

thanks for your advice but i can't find the command FixPartition all the command i see are in the attachments , can i reset my hard drive in any other way ?

[Dogbreath]

Press space three times to interrupt the boot process, when prompted. Then you can run FixPartition. Or at least you could, in pre-9 days. Maybe it's not there any more after 9.

[sunspark]

other : FixPartition



(attached)

[benve_97]

other : FixPartition



(attached)

This command isn't present in MiVB 9.x.x.x consolle because it's different from the 8.x.x.x one .

[acejavelin]

I thought to install 9.0 software you had to downgrade/install to 8.0 then migrate back up to 9.0?

[sunspark]

I thought to install 9.0 software you had to downgrade/install to 8.0 then migrate back up to 9.0?

you can fixpartition with windows tools .