Hi everyone, i have a problem with the firmware upgrade of the 3300 cxi II controller, last month i've succesfully upgrade the firmware from the MiVB 8.x to the 9.0.x.x using the migration tool and everything works fine. Last week I've tried to log in to the controller but after many times that i can't get in I decide to reset the system software using conosolle commands. Then i have try many times to reinstall MiVB 9.0.x.x ( i've tried different versions) but every time i got the error showed in the pic , for the system install i use commands in the other pic , from TFTPD64's sys log i see that everything is ok so the system software is correctly put on the controller but everytime i got the same error , I hope someone can help me.