Author Topic: MiCC IVR External Transfer Issue  (Read 1173 times)

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
MiCC IVR External Transfer Issue
« on: June 18, 2019, 09:01:20 AM »
Guys,

Here is another one I can't seem to wrap my head around. If I have an external transfer to a 10-digit local number or a Long Distance number 1+ it seems to go out just fine.

If I have an external transfer to a 1-8XX number then it always adds 011 to the front of it. Where do I fix this issue at?

Thanks,

TE


Offline VinceWhirlwind

  • Hero Member
  • *****
  • Posts: 899
  • Country: au
  • Karma: +31/-0
    • View Profile
Re: MiCC IVR External Transfer Issue
« Reply #1 on: June 19, 2019, 08:02:44 PM »
Sounds like you should start with the "ARS Digits Dialled" form and see what route the digits 18 get sent to

Offline Tech Electronics

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 2983
  • Country: us
  • Karma: +89/-1
    • View Profile
Re: MiCC IVR External Transfer Issue
« Reply #2 on: June 24, 2019, 07:23:01 AM »
VinceWhirlwind,

I see it adding 011 prior to it going to the 3300 when I look at the port log that the call was answered by in the IVR. What I have been unsuccessful at it figuring out where that is changed in the MiCC so that it doesn't do that.

Thanks,

TE


 

Sitemap 1 2 3 4 5 6 7 8 9 10